Monthly Archives: October 2021

High-THC strains may provide a variety of medical advantages. Synthetic THC, known as Marinol, is a prescription drug that treats or prevents nausea and vomiting produced by cancer therapies and is also used to increase appetite in persons with acquired immune deficiency syndrome (AIDS). Although THC has psychotropic effects, it is not considered strong or powerful enough to get you high. You should exercise caution when using high-THC strains if you aren’t familiar with the side effects. When cannabis oil containing no CBD is consumed, it’s considerably more likely to result in strong psychoactive responses.

Begin by choosing a high-CBD strain of cannabis since CBD appears to have some of the most widely accepted medical advantages. CBD has no psychoactive effects and no effect on your perception by itself. Please remember that any sort of medical marijuana, especially high-CBD strains, will contain traces of THC; however, high-CBD strains are less likely to change your perspective than high-THC varieties. There are two methods for obtaining CBD without THC that I’m aware of. The first is to extract CBD from hemp (the lawful cousin of cannabis), which is how it’s done right now. There isn’t any evidence suggesting that consuming hemp-derived CBD is just as effective as ingesting a high-CBD medical cannabis strain’s extract.

Many patients choose a combination of THC and CBD therapies, and this may be the best option for some. Sativex is a prescription mouth spray that contains a chemical compound derived from natural cannabis plant extracts. THC (delta-9-tetrahydrocannabinol) and CBD are the only cannabinoids present in Sativex, which comprises just two components extracted from the cannabis plant: THC and CBD. It does not contain all of the cannabinoids present in medical cannabis. This mouth spray is used to treat neuropathic pain and spasticity, as well as moderate to severe pain relief, in adult cancer patients who have exhausted all other treatment choices.

A mix of high-CBD and high-THC strains has been found to provide the best benefits of medical cannabis with the least amount of psychotropic effects, according to studies. There are also hundreds more cannabinoids in the cannabis plant that have not been studied as extensively, and some individuals believe they all contribute to greater relief. The last option you’ll have is to pick a strain based on its benefits. It will be very dependent on your condition and body – you’ll need to try several strains to figure out what works for you.

A Few Suggested Medicinal Strains

The most effective high-CBD strains are those that have been developed from a clone. However, in recent years, there has been a lot of progress with high-CBD seeds from seed.

• Harlequin (clone-only)
• Cannatonic
• CBD Shark Shock
• Charlotte’s Web (clone-only)
• ComPassion
• MED GOM 1.0 (by Grass-O-Matic & CBD Crew) <– Currently one of the highest CBD Auto-flowering strains
• Pennywise
• Sour Tsunami (clone-only)
• Learn more about CBD on ProjectCBD.org

Most strains available today are high-THC, but here’s a short list of tried-and-true cannabis strains that consistently produce high amounts of THC.

• Amnesia Haze
• BlackJack
• Chem Dog
• Critical Jack
• Dark Star
• Orange Hill Special
• Sour Diesel
• Super Lemon Haze
• Vanilla Kush
• White Rhino

Advantages of Making Your Own Edible Hash Oil

1. Quality Control – You choose the kind of cannabis utilized to make your drug (indica vs sativa, THC and CBD ratios, etc). You have complete control over the manufacturing process, so you know exactly what’s in your prescription.
2. Can be eaten or applied directly to the skin – You select the sort of cannabis used to create your prescription (indica vs sativa, THC and CBD ratios, etc). You have complete control over the manufacturing process, so you know exactly what’s in your medicine.
3. Can Be Produced at Relatively Low Cost –Edible hash oil can be made from low-cost cannabis sources like home-grown medical marijuana buds or “trim.” Trim is a term for the leaves and stems left over after cannabis bud production has been completed. Many growers throw away trim because it isn’t suitable for smoking, despite the fact that cannabinoids are present in lower amounts on the leaves and stems. Edible hash oil (as described on this page) may be produced at home. This technique is effective in concentrating these components into practical medicine. As a result, growers may convert their trim to edible hash oil rather than throwing away all of the leaves and stems, allowing them to make more medication from each crop. If you live in a state where cannabis is legal, you could possibly get or sell your trim from a local grower. Many medical marijuana patients choose self-grown weed because it’s less expensive. A little work might save you money over time.
4. Ingredients – Cannabis edibles frequently include additional components (such as sugar) that the patient may wish to avoid. Patients who consume a pure cannabis extract (such as the one outlined in this how-to) will receive only the cannabinoids, without any “extras.”

This technique will show you how to create a little amount of edible cannabis oil extract (Rick Simpson Oil, hemp oil, or edible hash oil) for personal use. An ounce of cannabis buds or an ounce of cannabis trim (leaves, stems, etc.) from a harvested medical cannabis plant may be used to make about 2-4 grams of oil.

While the doctor in the video claims that Rick Simpson oil is frequently utilized for cancer sufferers, it may also be used to treat epilepsy, chronic pain, nausea, and a variety of other ailments.

Creating cannabis oil in the method described in this video is quite safe, but it’s vital to note that safety depends on following the directions precisely. ALL solvents, such as alcohol, are highly combustible and must be handled with extreme caution and care.

Supplies Needed

• 1 ounce of medical cannabis buds – very dry & ground up – It’s also possible to use peppermint, lavender, or other essential oils that contain eugenol in place of the cannabis oil.
• 1 gallon Solvent (High Proof Alcohol) – The method described here requires a large bottle of Everclear, the suggested solvent for cannabis extractions (Everclear is a highly proof spirit that is suitable for human consumption). If you don’t have access to Everclear in your state, other natural high-proof drinking alcohols made specifically for human consumption can be used instead. The higher the alcohol concentration (proof), the better. Never use booze that wasn’t intended to be consumed by humans (such as rubbing alcohol) for this method! Anything other than alcohol in your solvent may remain behind, so spirits with a higher proof are ideal since nearly everything will be evaporated away and anything left over is edible. The essential resin and oil (the “good stuff”) will be extracted from the cannabis buds or trim using the solvent. You’ll only have the actual cannabis hash oil extract after all of the solvent (alcohol) has been evaporated.

• Medium-sized Mixing Bowl – Pyrex glass or ceramic mixing bowls are best – stay away from plastic or metal mixing vessels.
• Large Spoon – Stir with a sturdy spoon or a soup spoon until completely combined.
• Straining Device – It’s also where you’ll find a strainer. The mesh screen is used to strain your cannabis alcohol mixture and remove the solid plant matter, leaving only the liquid with all of the resin and cannabinoids from cannabis.

Examples:

• Linen bag (often found in the pots and pans section)
• 2 or 3 grain-steeping bags (made of muslin with a large weave – use 2 or 3 bags inside one another)
• A clean sock
• Cheesecloth and a strainer (often available in the pots and pans section of a store)
• The Thai tea filter, made of stainless steel and with dimensions of 54.5x29cm, will fit all sizes of teapots.
• Coffee filters (don’t work well) are used in conjunction with a strainer.
• A separate container to catch strained liquid – A 2-quart mixing bowl is ideal, or you may get creative. In the video, the physician uses a tall and broad cup that she found in the house. This container will trap the liquid that drains out of your mixture as you strain out the plant matter.
• Double-Boiler System (or a pot and pan that fit nicely together) – A double-boiler is a form of pot and pan setup that may be found at any home improvement or big box store. A double boiler allows your upper vessel to sit in a “bath” of water, ensuring the solvent container with never come into direct contact with the stove’s heating element. A non-stick top pot, with a lid that will fit tightly over it, is required. If you don’t have a double boiler, any two pots or pans that fit together snugly may be used. It will operate as long as the bottom pan is filled with water and the top pan sits securely on top.
• Silicon spatula – You probably have one in your kitchen right now, it’s used to scrape the oil from your pan as it develops at the end.
• Plastic syringes – Oil or butter rigs (often known as “buttery”) may be found at the drug or grocery shop. Because you’re making such a concentrated kind of cannabis extract, you’ll need to use these in order to distribute tiny amounts of cannabis hash oil.

Your Preparation Area

• Heat Source– A gas stove, on the other hand, is extremely unsafe. A gas stove (if you have one) uses an open flame, which means you must take greater care with it than an electric burner or a large tea warmer. A portable electric burner or a big tea warmer are also excellent choices.
• Fire Extinguisher –You should already have one near your stove, but double-check to make sure it’s still good and not expired.
• Ventilation – A large open area with excellent ventilation should be your preparation space. Open any windows and utilize at least one fan to distribute the air throughout the room. If a fan above the stove is available, turn it on. The fumes from solvents can cause fires, therefore ensuring adequate ventilation in your prep area is the greatest measure you can take to safeguard yourself during this procedure.

Time Needed

• Cooking time is about 30 minutes, and total preparation is 1 hour – It takes about an hour to prepare your edible hash oil if you collect all of your materials. The first time you make edible hash oil, it will almost certainly take more than one try. For your first attempt, I suggest setting aside at least 2 hours.

Step 1: Gather supplies

It is critical to get everything ready in advance! Before you start, make sure you have all of the necessary items on hand. Make sure you have your double-boiler, a little extra flat surface 3+ feet distant from the stove, and your cannabis (ground up), as well as a bottle of your chosen solvent.

Step 2: Place ground cannabis buds or trim into the first mixing bowl

In a smaller mixing bowl, combine the very-dry cannabis flowers or trim with an equal part of water. Ensure there is at least a few inches of space above the cannabis product since you will be pouring a liquid into the basin with it shortly.

The doctor, in the video, employs a huge ceramic mug as a mixing bowl and adds an ounce of dried and ground medical cannabis buds.

Step 3: Add enough Everclear to cover the cannabis completely, plus a bit extra

Cover your marijuana plant entirely with your solvent (Everclear), then add another inch of solvent above the top.

As you can see, the cannabis material has been totally immersed in solvent, and there’s a little bit more solvent added on top to allow for mixing.

Step 4: Mix Everclear and cannabis together for about 3 minutes

After the cannabis has been soaked in the solvent for three minutes, use your mixing spoon to work it. This mixes the cannabis material and distributes the solvent throughout it, allowing all of the oils/resin to be dissolved into your alcohol.

It’s important to shake and twist the weed well before you put it in a grinder. If any of the leaves remain after mashing down the herb, simply move them around until all of the resin has been dissolved by the alcohol.

Step 5: Strain the Everclear-cannabis mixture into your other container

Allow the mixture to drain into your clean container, gently pouring the cannabis solvent oil through your muslin bag (or whatever you’re using to strain the mix). This strained liquid contains all of the extracted resin from the cannabis, which has been dissolved in alcohol.

You may want to squeeze out as much liquid from the bag as you can.

Step 5b (if desired but suggested): Replace the cannabis material in the mixing bowl, then repeat Steps 3, 4, and 5 to extract oil from the plant a second time.

Re-insert your cannabis into the mixing bowl you began with, then wash it with the solvent to extract any remaining cannabinoids into the alcohol.

Repeat Steps 6 through 9, then work the starting material for another three minutes with the wooden spoon you have been using. Pour this last solvent oil mix into your other container (that is holding the solvent oil mix from the first wash you did) in exactly the same manner as you did before.

If you begin with a big bottle of Everclear, you will be nearly entirely finished with it by the time you’ve completed the first two washes. A third wash on plant material wouldn’t produce much oil and would offer little or no therapeutic value. The first wash dissolves 70 to 80 percent of the resin on the starting material, while the second wash removes almost all of the remaining resin that is useful.

Step 6: Pour dark green liquid into top pot of the double-boiler

Fill the top pot of your double-boiler with the solvent oil combination from the first and second washes. nYour bottom pot should already be filled with water.

The main goal of utilizing a double boiler is to create an extra barrier of water between the heat and the top pot with the alcoholic combination. This makes everything much safer, as well as allowing you to simmer off the alcohol slowly and evenly without burning it all away.

Everything is now in place to evaporate and boil off the alcohol, and you’ll be left with only the pure cannabidiol oil at the end of the process.

If you don’t have adequate space in the top pot for all of your combinations, it isn’t a problem. When the level in the top pot drops in the next stage, you may carefully add any remaining portion of your liquid mix until there is nothing else to add.

Step 7: Put a large saucepan on the stove and fill it halfway with water. Bring to a boil over medium-high heat. When the liquid in the top pot begins to bubble, turn off the heat immediately. The warmth from the boiling water will continue to warm the top pan until all of the Everclear is evaporated away.

While the solvent is evaporating, make sure there are no sparks or open flames or red hot components in the area, because the fumes produced by the solvent are extremely combustible. Avoid breathing in solvents’ emissions.

Make sure the heat is on high, and double-check that all of your windows are open and a fan blowing across the room. If you have a stove, make certain the fan above it is turned on.

As a result of this increased heat, the top combination will begin to bubble, almost like it is boiling. What you’re seeing is actually a very low amount of heat; what you’re seeing is alcohol evaporating away.

Once the dark green mixture begins to bubble, turn off the heat as soon as possible. The heat remaining in the water will generally be enough to evaporate all of the alcohol. If you’re cooking this in a chilly environment, if you’re cooking it in larger amounts at once, or if your pan is narrow, you may need to turn the heat back on low a couple more times if the top pan stops bubbling.

When the top pan is boiling, it generally takes around 15-25 minutes to finish the second phase. Checking back every few minutes with your silicone scraper will help you avoid overcooking or burning anything.

You want to look for a little bit of bubbling at the top pan as the alcohol cooks away, which indicates that it’s done. As the alcohol is removed, the bubbling will slow down, although you should still notice it along the borders.

If the liquid hasn’t yet stopped bubbling but is still runny, turn the heat back on low for a minute or so until it begins to bubble again. You’re keeping the heat low (at maximum) because you don’t want your medicine to overcook.

The alcohol will eventually evaporate away, even if the mixture cools to room temperature (which is unlikely in a chilly room), as long as you continue to stir.

Step 8: You are done when the liquid has become thick and no longer bubbles – it should look like this

Everything you had begun with has been reduced to this. You washed the marijuana with alcohol in order to extract the oil, and then removed all of the plant material. Now that the alcohol has evaporated, you’re left with just cannabis oil.

While the oil is still soft, it hardens as it cools. It becomes thicker, almost like putty, once it has cooled down. To make storing and dispensing your drug easy, work fast and steadily to fill a plastic syringe with this combination. Keep in mind that this is a large amount of medication, and that the starting dose is a grain of rice less than before.

Step 9: Use a plastic syringe to draw up the oil – this will allow you to easily create individual portions in the future

Quick Tip: If you want to make lower doses of the cannabis oil, combine it with coconut or olive oil.

If you’re making edibles, you’re using plastic applicators or syringes with no needles. These are often employed to deliver medicine to youngsters and can be found at any pharmacy or grocery store.

Fill a clean container with the cannabis oil. Using the plunger of the syringe, slowly withdraw the warm cannabis oil. The first few syringes will be simple to fill as there will be plenty of liquid in the pan at first, but as you use less and less liquid, it will become more difficult. That’s completely normal; just take your time and do your best.

If you don’t have a syringe large enough to hold all of the cannabis oil, consider putting what’s left in any kind of tiny closed container and using a toothpick to get little rice-sized pieces for individual portions after it has cooled.

After it has cooled, the semi-runny oil will become much thicker—if the cannabis oil becomes too thick to push out of the syringe, simply run hot water over it to loosen it.

Strong Warning: Cannabis may help with a variety of ailments, but it has not been proved to cure any illnesses. Please be wary of sites that claim cannabisHash oil can really cure any disease. These assertions haven’t been backed up by enough evidence.

While there is a lot of evidence that cannabis helps patients feel better for many illnesses, it has never been demonstrated that marijuana can heal anything. The illegal nature of cannabis is partly to blame for the lack of good evidence about cannabis’ true healing abilities due to the fact that medical researchers have been unable to conduct clinical trials because of its widely forbidden status.

There are just one or two benefits of medical cannabis that have yet to be verified. Please bear in mind that cannabis is widely regarded as an alternative medicine and should never be substituted for professional medical care.

Terpenes are aromatic hydrocarbons that may be found in the essential oils of all plants and have been used in medicine for thousands of years. Terpenes are now well-known for being the chemicals responsible for each cannabis strain’s distinct odor and flavor, but it was only recently discovered that they might impact the plant’s effects.

According to the entourage effect, cannabis’ active components may work better together than they do alone. Terpenes have a significant role in this. Plants produce terpenes as a defense mechanism against insects and illness. They are responsible for the distinct odors and tastes of each species. Terpenes also influence human physiology by impacting several processes.

Terpenes are a kind of chemical in the cannabis plant that give it its distinctive aroma and flavor. Terpenes can be found in many plants, but they are particularly common in marijuana. Myrcene is the most abundant cannabis terpene, and we’ll look at it in this post.

About Myrcene

The most common and highly active terpene in cannabis is Myrcene (also known as alpha-myrcene or beta-myrcene), which has a spicy, earthy, musky fragrance that gives cannabis strains a somewhat sweet flavor profile.

Isopropyl myrcene is also found in plants such as lemongrass, eucalyptus, and ylang-ylang, as well as fruits like mangos (have you heard the claim that they can boost your high? It’s true) and herbs like thyme, basil, and hops (the one that gives beer its flavor). However, cannabis is far and away the most abundant source of myrcene.

Myrcene is a terpene that can help to calm the body and mind. Cannabis with myrcene levels above 0.5 percent induces the euphorically named “couch lock,” a deep state of relaxation caused by Indica-dominant strains. In fact, myrcene may account for up to 50% of total terpenes in a cannabis plant. Sativa-dominant strains, on the other hand, are known to have less than 0%.

Medicinal Efficacy

Terpenes and the cannabinoid-induced benefits triggered by the mammalian endocannabinoid system (ECS) are surprisingly similar. The main function of myrcene is to put you to sleep, resulting in limber muscles and a reduction of pain. This has obvious value in a variety of conditions involving spasticity, seizure activity, or hyperactivity (including ADHD), as well as common and often serious illnesses like fibromyalgia and Post Traumatic Stress Disorder (PTSD).

Russo adds, “The available data and findings “support the hypothesis that myrcene is a significant sedative terpenoid in cannabis, and—combined with THC—may produce the ‘couch-lock’ phenomenon of certain chemotypes decried or appreciated by recreational cannabis users.”

Myrcene is a common component in essential oils. According to Leafly, “Pair this notoriously anti-inflammatory terpene with herbal cocktails containing lemongrass or hops for a powerful calm that may put those numbered sheep to rest.” It’s been shown in studies to help patients suffering from sleeplessness, restlessness, and a variety of types of anxiety. “This specially anti-inflammatory terpene can be paired with herbal concoctions containing lemongrass or hops for a strong tranquilizer that may put those numbered sheep to rest,” according to Leafly.

Myrcene is not only anti-inflammatory and antidepressant, but it’s also an antiseizure agent. Myrcene has the same function as limonene, which is to alter cell membrane permeability. It acts as a regulator of other terpenes and cannabinoids, increasing or buffering their impact and strength (much like CBD does with THC).

Myrcene is a unique chemical compound in cannabis with the ability to boost the amount of THC molecules that reach CB1 receptors in the brain and central nervous system, increasing the potency of this drug’s psychoactive effect while also enhancing its medical efficacy. In this respect, myrcene is an excellent example of the entourage effect.

Dr. Ethan Russo, a research scientist and board member of the International Cannabis Research Program, wrote: “It’s an excellent illustration of the entourage effect, in which both terpenes and cannabinoids work together synergistically to produce or enhance a certain therapeutic benefit that can’t be obtained from any one cannabinoid or terpene alone.” In 2015, Gooey Rabinski published this:

Myrcene has a calming effect, which is why it’s often used as a sedative. It also contains anti-carcinogenic, antibacterial, antioxidant, and antiseptic qualities. Myrcene can also help to relax muscles, making it an excellent option for neurological disorders including dystonia, epilepsy, and Parkinson’s disease. The tranquilizing effects of myrcene are considered beneficial in the treatment of mental illness.

Myrcene Benefits

Myrcene also has antioxidant properties, which can protect cells from oxidative damage and result in a longer lifespan. Furthermore, studies on myrcene’s effects suggest that it may have some important functions of its own. Although research on terpenes and myrcene is still in progress, here’s what we know so far.

Sedative Effects

The relaxing, sedative effects of myrcene are perhaps best-known. In the journal Phytomedicine, researchers examined the impact of myrcene on mice in a 2002 study. Myrcene had an antiactivatory effect on mice, making them less inclined to explore the open arms in an elevated plus-maze test at higher doses. It also increased sleeping duration by over 160%.

The preliminary results of this study are promising for anyone suffering from stress or sleeplessness. High-myrcene cannabis strains may potentially provide strong sedation and help people get a good night’s sleep.

Anti-inflammatory Effects

Researchers have also discovered that myrcene may aid with inflammation reduction. The majority of people associate inflammation with unpleasant diseases such as arthritis. Scientists have linked it to a variety of other problems, including heart disease, strokes, diabetes, and cancer.

A 2015 study published in the European Journal of Pharmacology examined the effects of myrcene on inflammation in osteoarthritis. Human chondrocytes (cartilage cells) were treated with myrcene, and the results demonstrated that it reduced inflammation and catabolic activity. The authors suggested that myrcene might slow or even stop cartilage damage in this situation.

If you’re looking for an effective inflammation pain relief option, consider selecting a high myrcene strain. Choose a CBD-rich strain to potentially improve its effects, since CBD has powerful anti-inflammatory qualities.

Analgesic Effects

Myrcene may also help with pain relief. A study published in the Journal of Pharmacy and Pharmacology in 1990 looked at the analgesic effects of myrcene in mice. The authors used a hot plate method and the acetic acid-induced writhing test on mice to examine nociception. Myrcene inhibited nociception, demonstrating that it has an anti-inflammatory activity.

The effect of myrcene was blocked by naloxone, suggesting that this terpene modulates the body’s endogenous opioids. These chemical substances are made naturally by the body in response to pain. They function similarly to opiates like morphine, with the exception that they have less severe consequences.

Myrcene, on the other hand, may be able to help with a number of the most prevalent types of pain. This could make high-myrcene strains advantageous for anybody suffering from painful problems, in addition to its sedative and anti-inflammatory actions.

Potential Risks: Does Myrcene Cause Cancer?

Although myrcene has a number of health benefits, some scientists have associated it with an increased cancer risk. In 2010, a study performed by the National Toxicology Program revealed that high doses of myrcene induced tumorgenicity in rats. Male rats, in particular, had a higher incidence of kidney and liver cancer when exposed to high quantities of myrcene, according to the research.

Despite these concerns, there is presently no evidence that myrcene causes cancer in people. However, in light of the study, the Food and Drug Administration (FDA) removed it from its list of authorized additives in 2018.

There is some disagreement as to whether myrcene should be classified as a cancer-causing chemical or not. Until further study is done, it’s impossible to say how safe myrcene really is.

The FDA, however, has clarified that its new rules apply to synthetic myrcene rather than natural products that contain it. It’s uncertain whether naturally occurring myrcene may cause the same effects.

High Myrcene Cannabis Strains

The majority of cannabis strains with a high myrcene content are indica in origin. This is to be expected, given that many consumers prefer indicas for their sedative and pain-relieving qualities.

The following are some of the most well-known high myrcene marijuana strains:

• OG Kush
• Skywalker OG
• Blue Dream
• Remedy
• 9 Pound Hammer
• Grape Ape
• Granddaddy Purple
• Girl Scout Cookies
• Thin Mint GSC
• Tangie

These strains, while not powerful enough on their own, might be used in combination with other cannabis plants to treat pain and inflammation. Because they may induce drowsiness,

Other Sources of Myrcene

Myrcene is a chemical component found in cannabis and various herbs, spices, fruits, and vegetables. The following are some of the most prevalent sources of myrcene:

• Hops
• Lemongrass
• Thyme
• Bay
• Basil
• Verbena
• Carrots
• Pomegranate
• Mango

What science says about myrcene

Myrcene has been the focus of scientific study for a long time, and it’s one of the terpenes that receives a lot of attention for its medical applications. Researchers in Brazil discovered myrcene operated similarly to lemongrass tea, which is used in some traditional medicine systems as a mild sedative. It’s also considered to have anesthetic qualities, and it’s important in the creation of minty-flavored menthol cigarettes.

According to researchers, myrcene has pain-relieving effects for individuals suffering from migraines. Myrcene, along with linalool and eucalyptol (both are terpenes present in cannabis), was discovered in one 2008 study to help protect human cells from neurotoxins that can produce genetic damage that leads to cancer.

Final Thoughts

The myrcene terpene is a cannabinoid that has a variety of health benefits. It has sedative and relaxing effects, which may assist with inflammation and pain alleviation. Strains with a lot of myrcene might be beneficial for people suffering from tension, sleeplessness, or painful problems. When searching for a high myrcene strain, choose an indica or hybrid variety with strong indica origins.

High-myrcene cannabis, on the other hand, is ideal to consume later in the day. Otherwise, it might induce profound drowsiness to the point where you fall asleep on the couch.

Myrcene has been linked to cancer in rats by several researchers. However, there is no proof that this happens in people. We propose that worried individuals read the study and decide whether the advantages of

Hashing is the process of breaking down cannabis buds or leaves into smaller pieces, usually to reduce their size and potency. This method of extraction produces no crystals or heat, so it’s also known as “dry sieving.” What exactly is hash? How does it come about? We’ll go through the ins and outs of hash production as well as several different ways to make it so you can pick the one that’s right for you!

Have you ever been curious about how to produce hash? One of the most potent cannabis concentrates available. It may take a long time and effort, but it’s not difficult to do on your own—far from it! In fact, if you have the correct equipment, creating hash at home is simple.

Did it catch your attention? After reading this, you may have a lot more to offer us. The essay that follows will go over everything there is to know about hash. Then we’ll teach you how to make the hash of your choice using a variety of hashing strategies.

About Hash

In a nutshell, trichomes that have been scraped away is known as hash. What exactly are trichomes, and how do they appear? Examine your buds for hair-like formations on the surface of the leaf. Each of these, as you might suspect, is a trichome.

If you haven’t tried, check for trichomes under a magnifying glass or microscope. They’re also that sticky resin you feel between your fingers that contain all of the good stuff, including terpenes and THC and CBD.

Trichomes can be found on almost every inch of the plant, but they are especially abundant on mature cannabis flowers. Many growers retain the “trim” (cannabis stems and leaves, for example) since it may be used to make edibles or hash by removing all of the trichomes.

Hash vs Kief

Trichomes were once called “kief,” which was mistaken for sand and resembled fine powder. Hash is the result of kief that has been taken from cannabis plants and subjected to various treatments. There are numerous hash-making processes, some of which we’ll discuss later in this article, but they all entail heating and pressurization, followed by molding or pressing to shape a flexible ball or flat brick.

Kief is a coarse, dry powder derived from plant material that has been roasted or smoked. It’s one of the most psychotropic chemicals known to man, and it’s simple to come by.

From What Parts of the Cannabis Plant Can Hash Be Made?

It’s more difficult to grow cannabis than many people believe. Trichomes can be removed from various regions of the plant’s anatomy:

• Male plants: To avoid pollinating their females, cannabis growers frequently destroy male plants. However, don’t throw out your males just yet; you may still utilize them to make your own hash. Male plant trichomes are less potent than those in female plants, but they can still be utilized.
• Fan leaves: The sugar leaves (also known as fan leaves) are the most visible and largest leaves of the cannabis plant. They don’t contain as much kief as the sugar leaves, but they’re still essential for producing hash.
• Sugar leaves: The sugar leaves are the tiny, spikey leaves that grow within the flowers. They’re known as sugar leaves since they have a trichome-rich surface.
• Dried Buds: The ideal choice is to use a vibrating sieve. Dried buds are frequently used in dry sifting, which is one of the most basic hash production methods.

How Is Hash Made?

Hash production is simple to understand. It involves gathering kief and shaping it into a brick, block, or ball using a variety of methods, as we previously said. Before we go through different manufacturing processes, let’s look at the major differences between solvent-based and solventless hash.

Solventless Methods

To extract the resin, you must first heat the cannabis in a sealed container over an open flame. You may do this by burning it, but if you don’t want to clean up empty fuel cans or don’t have access to a gas stove, this isn’t ideal. The resulting ash, which contains almost all of the cannabinoids and terpenes present in the plant material, can be collected and used as hash alone. The old-fashioned way, without the use of solvents, is used to separate the trichomes. Instead of utilizing chemical techniques, you may rub your dried herb between your hands or set up a silkscreen to remove the trichomes.

After you’ve removed the trichomes from the kief, mold it, and then cook it,

Solvent-Based Methods

The newest method of hashish production is the one that employs solvents. Butane, propane, or CO₂ is used to extract the cannabinoids and terpenes from the trichomes in this technique.

Before you can use the hash, it must be rendered solvent-free. You’ll need to either cook it into a wax using a hot plate or subject it to a vacuum desiccation chamber for BHO (butane hash oil). It’s extremely combustible, making this approach highly hazardous and not suggested for home usage.

THE BEST STRAINS FOR CRAFTING HASH

ROYAL GORILLA

Royal Gorilla is a must-try if you’re considering creating a new batch of hash, but only if you can handle substantial amounts of THC. This behemoth was the product of a significant cultivation process that included parents strains Sour Dubb, Chem Sis, and Chocolate Diesel. This strain has no conscience and delivers powerful effects fueled by THC levels over 25% right away. She also contains a 50/50 mix of sativa and indica strains, which has a strong impact that is equally divided between the physical and mental realms. The sativa components stimulate the brain while relaxing the muscles, while the indica elements give a comforting warmth throughout the body.

SOUR DIESEL

Sour Diesel is an excellent choice for this purpose since it’s known to provide a euphoric and buzzing high. It’s only natural to choose strains that will enhance these effects since Hash is recognized for producing a euphoric and buzzy high. This sativa-dominant hybrid has 70% sativa genes and 30% indica genes, giving it a fiery and active quality that complements the “upper” effect of top-notch hash. Hemp has the ability to act similarly, however she’s stronger than many indicas. She’s an even hybrid strain with THC levels of up to 24% based on extracts from Original Diesel, Northern Light, Shiva, and Hawaiian. When you smoke a marijuana joint infused with her flowers, you’ll get a clear-headed and attentive high that enhances attention and critical thinking. The hash produced from these flowers has a wonderful herbal complexity to it.

ICE

Her iconic Indica Crystal Extreme, commonly known as I.C.E., was named in her honor for her copious trichome production. The bulky and bulbous blooms of this strain appear to have been snowed on, although they’re really just thick clusters of resin! It appears as if this plant was designed entirely for hash manufacturing; with each rub, numerous layers of sticky resin will be pressed to the fingertips. You’ll be able to construct a huge temple ball rather quickly. She was created by crossing the legendary Afghan, Northern Light, and Skunk strains. This combination has resulted in a highly indica-dominant strain that offers an almost immediate bodily high when breathed in. The effects are relaxing, meditative, and healing. Smoking this hash at night aboard a ship is equivalent to boarding an express boat to euphoria. The THC concentration is set at 18% to ensure pleasant highs without being too powerful.

Kief, or keef, is a highly concentrated form of cannabis that contains the most potent portion of the marijuana plant as a lightly colored, cannabinoid-packed powder. It has been collected and utilized for thousands of years as a method to consume cannabis, kief, or keef.

Kief is an excellent choice if you want to increase your cannabis intake or simply wish to use it in a variety of ways since it contains more cannabinoids than cannabis flower.

WHAT IS KIEF?

The accumulation of light-emitting resin trichomes that form on the leaves and buds of marijuana is known as kief powder. Trichomes are tiny, bulbous glands protruding from the surface of mature cannabis plants’ buds and leaves. These trichomes can be scraped off the plant material, resulting in kief, a highly concentrated type of cannabis.

Kief is a type of cannabis that contains a high concentration of cannabinoids and terpenes. It’s more potent than a typical marijuana flower because it has a higher quantity of cannabinoids and terpenes. Kief, on the other hand, is less powerful than concentrated extracts like marijuana shatter or wax.

Kief, often known as “dry sift” or “pollen,” is a glittering, powdery-looking substance. Kief of superior quality is commonly light tan or blonde in color and has a strong scent. If the kief is green, it’s probably due to additional plant material and isn’t as pure or concentrated as lightly colored tan or blonde kief.

What Is Kief’s Potency?

Kief, according to experienced cannabis users, is the first high-THC concentrate. While the most powerful cannabis flower generally has around 25-30% THC, kief is far less potent (see below). Kief can have anywhere from 50 to 80 percent THC content, and it’s not at all unusual for it to be 99 percent sifted through the trichomes’ heads.

Kief is so potent because it’s just trichomes, which are essentially pure THC. Trichomes are the most powerful components of the marijuana flower and have the greatest cannabinoid levels. Isolating trichomes provides for a strong, intense high that many MMJ patients find appealing. Kief also delivers an almost immediate high.

Things You Never Knew About Kief

In reality, the term “kief” originated from the Arabic word “kayf,” which means “pleasure” or “well-being.” Kief refers to the powdery resin produced by cannabis’ trichomes. The crystal-like hairs covering a bud are known as trichomes, and they contain most of the plant’s medicinal ingredients. Trichomes can be removed from the flower to produce kief, resulting in a fine powder with a strong flavor.

Kief, it turns out, has a lot more applications than just getting you high. Here are seven facts about this ancient concentrate that you probably didn’t know.

Kief contains high concentrations of THC

Kief is a resin extracted from the cannabis plant’s trichomes. The highest concentrations of cannabinoids can be found in trichomes. You’re left with a more powerful form of cannabis when trichomes are removed.

This is why kief is such an appealing option for people who need a quick dose of cannabis. Kief’s high concentration makes it ideal for delivering a quick dose of cannabinoids and terpenes. This is fantastic news for those looking for fast relief.

There are different colors of kief

Did you know there are various hues of kief? Purer kief is actually lighter in hue. Plant debris was present in the dark green kief, which proved it to be a dirty mix. This is due to sloppy cleaning methods. When kief is cleaned well, it acquires an off-white color. Kief that has been removed correctly separates the trichome crystals from the plant material, leaving only the finest (and most potent) parts of the plant behind.

Kief can be added to coffee

Kief can be taken in a variety of forms, including smoking. Coffee enthusiasts may simply add kief to their cup of Joe. Now, for first-timers, the notion may seem quite strange. However, the heat of the coffee activates the kief’s cannabinoids. The effects are more long-lasting when they work their way through your body’s digestive system. Kief is comparable to an infused edible in that it has medicinal properties.

There are multiple ways to collect Kief

The most popular approach to collect kief is with a 3-piece grinder. Kief collection in a grinder is something that most cannabis consumers are already familiar with as a byproduct of grinding their buds. However, there are several different ways to collect kief.

People who want to save money on kief will often use a pollen sifter box when gathering larger amounts of it. These boxes are made up of trays and screens that are designed to catch the kief at the bottom tray. Sifters speed up the process by breaking off the trichomes from the buds and distributing them throughout other trays.

Regardless of the extraction process you decide on, keep your kief in a cool, dark location. To maintain good quality (particularly if it’s a large amount) , whisk the kief every few days to keep it fresh.

Kief burns very quickly

When kief is heated, it burns rapidly. To prevent waste, spread your kief outside the bowl’s inside lining. This will extend the life of the kief between hits.

Kief may be sprinkled over flower to make it more potent. You can use any bowl, joint, blunt, or other device for this. Remember that a little amount of kief goes a long way when utilizing this approach. Kief is considerably more powerful than flower.

Kief can be used for making butter

Are you looking for a more potent infusion for your edibles? Consider using kief. Kief may be used to make infusions, just like flowers or hash oil. It’s less likely to impact the taste because you use less kief for the same potency. To create kief butter, you’ll first need to decarboxylate the kief.

The decarboxylated kief is now ready to use in recipes. Place the butter in a saucepan and bring to a simmer over medium heat. Stir in the kief gradually, stirring every 10 to 15 minutes until fully absorbed. Kief butter may be kept in an airtight freezer container for up to 6 months after cooking is completed.

WHAT ARE THE BENEFITS OF KIEF?

Kief is a popular product for cannabis enthusiasts because it has a greater high concentration of cannabinoids and terpenes than many other marijuana products. Kief’s strength varies depending on the marijuana plant from which it’s derived, but it frequently contains more than 50 percent tetrahydrocannabinol (THC), which is significantly more potent than marijuana flower with an average THC level of 12-25 percent.

Kief is a powder extracted from cannabis flowers. It can be used to quickly and efficiently get the THC, cannabidiol (CBD), cannabigerol (CBG), and other cannabinoids you desire while also eliminating the plant material that may give you a harsher smoking experience. Kief is both simple to collect and use. It doesn’t require expensive extraction equipment like some other concentrates, so it’s simple to produce kief at home yourself.

Kief, when consumed in a vape pen or added to edibles that do not involve combustion, is beneficial because it avoids the dangers and toxins of combustion.

There are more than 100 compounds present in the cannabis plant, according on current knowledge. Cannabidiol (CBD) and tetrahydrocannabinol (THC) are the two most plentiful and well-known chemicals. Each of these cannabinoids has its own set of characteristics and can have various effects on the body.

The most obvious difference is that THC makes you feel good, whereas CBD does not. Furthermore, while CBD may be obtained from the cannabis plant, there are restrictions on where it can come from owing to legal issues.

Hemp & Cannabis – What’s the Difference & What Can They Do for The Body?

Cannabis and hemp are two different varieties of the cannabis plant, with only a legal difference between them. Hemp has less than .3 percent THC content, whereas cannabis has more than that.

Hemp and cannabis utilize the same endocannabinoid system (ECS) in the human body, which governs their effects. The endocannabinoid system (ECS) is a collection of receptors and endocannabinoids that influence them. These combine to have an influence on a wide range of essential activities, including pain, hunger, sleep, and more.

Cannabis also contains various cannabinoids, terpenoids, and flavonoids that are beneficial to the body. THC and CBD are by far the most prevalent of these chemicals, with a lot of study dedicated to them. But what are they, how do they function, and why are they diverse from one another?

CBD & THC – The Superstar Cannabinoids

Until fairly recently, the majority of people associated cannabis with getting high, so the interest was just on THC. Scientists have lately found CBD and other cannabinoids, suggesting that another avenue for studying the therapeutic advantages of marijuana opens up. Both THC and CBD are cannabinoids in the cannabis plant, and both are present in the crystalline resinous trichomes that cover a mature cannabis flower. Each strain, however, creates significantly different quantities of each chemical.

What is THC & How Does It Work?

THC is the most essential and popular star in the cannabis plant, and it is what makes people high. While a high-THC strain will undoubtedly change your brain, it may also have therapeutic benefits that are sometimes ignored.

When THC enters your brain, it activates neurons and causes dopamine release. THC also activates cannabinoid receptors in the brain, which have a wide range of effects. While some THC strains provide you with a burst of energy and creativity, other strains give you a relaxing effect as the high takes over your body. The effects of particularly potent cannabis strains can strike you within 10 minutes. Here are some of the most common effects of THC:

• Increase in appetite
• Drowsiness
• Analgesic
• Relaxation
• Euphoria

What is CBD & How Does It Work?

Cannabidiol (CBD) is a cannabinoid that does not cause intoxication and is frequently used to treat illnesses since there is no ‘high’ associated with it. While experts are still researching how CBD works in the body, studies indicate that it interacts with the ECS. CB1 and CB2 are two of the main cannabinoid receptors found in the ECS. The CB1 receptors are mostly located in the brain and have a significant role in memory, sleep, mood, hunger, pain sensation, and other functions.

Cannabidiol (CBD) has two types of receptors: CB1 and CB2. The endocannabinoid system, which is made up of cannabinoid receptors and endocannabinoids, regulates pain, inflammation, mood, memory, appetite, pleasure, movement disorders such as Parkinson’s disease Tremors), depression. THC binds to both kinds of receptors but CBD activates them indirectly by increasing the amount of endocannabinoids in the body. CBD also inhibits natural endocannabinoid breakdown. Here are some of CBD’s most common effects:

• Anti-anxiety
• Anti-convulsant
• Neuroprotective
• Antioxidant
• Anti-inflammatory

THC – Why the High?

When it comes to the intoxicating effects of cannabis, we must focus on CB1 receptors in the brain and nervous system. THC binds strongly to CB1, whereas CBD does not. Because THC is designed like a plug – i.e., fits well into a CB1 receptor socket – it activates these receptors effectively.

The primary cannabinoid present in cannabis, THC, has been shown to bind specifically to the CB1 receptor. Furthermore, it partially mimics the ‘bliss molecule’ called anandamide, which is a naturally occurring endocannabinoid. The fact that THC resembles anandamide means that when it binds to CB1 receptors, it contributes to the euphoric sensations associated with cannabis.

However, cannabidiol (CBD) is an antagonist of CB1 receptors and therefore is not a good fit. In fact, it inhibits the CB1-activating properties of THC. CBD, in a nutshell, means that THC’s mind-altering effects are reduced. If you consume cannabis with 22% THC, for example, you may experience dizziness or euphoria. If it also contains 8% CBD, on the other hand, the psychoactive effects will be decreased, as well as anxiety.

CBD vs. THC: Chemical structure

CBD and THC have the same molecular structure: 21 carbon atoms, 30 hydrogen atoms, and two oxygen atoms. The varying effects on your body are due to a minor variation in how the atoms are positioned.

CBD and THC are chemically similar to your body’s endocannabinoids. They may bind to your cannabinoid receptors as a result of this chemical resemblance.

The impact of the interaction on neurotransmitter production in your brain is obvious. Neurotransmitters are chemical messengers that connect neurons and have functions in pain, immune function, stress, and sleep, among other things.

CBD vs. THC: Psychoactive components

CBD and THC, despite their comparable chemical structures, do not produce the same psychotropic effects. CBD is psychoactive; however, it isn’t in the same way as THC is. It doesn’t generate the euphoria associated with THC. CBD has been proven to alleviate anxiety, sadness, and seizures.

THC binds with the cannabinoid 1 (CB1) receptors in the brain, causing a high or sense of euphoria. CBD has little affinity for CB1 receptors and cannot bind to them on its own. THC must bind to CB1 receptors in order for CBD to work and can help reduce some of the unpleasant psychotropic effects of THC, such as euphoria or sedation.

CBD vs. THC: Legality

Cannabis-related legislation is changing in the United States on a regular basis. CBD, technically speaking, remains a Schedule I substance under federal law. Hemp has been removed from the Controlled Substances Act, but CBD continues to be listed as a Schedule I drug by the Drug Enforcement Administration (DEA) and the Food and Drug Administration (FDA).

However, 33 states plus the District of Columbia have decriminalized or legalized cannabis-related laws, allowing for medical marijuana with a high THC concentration. The use of THC and cannabis for recreational purposes is now legal in several jurisdictions. CBD should be able to be found in anyplace where cannabis is lawful for either personal or therapeutic use.

Before you try to purchase CBD or THC-infused items, you should learn about your state’s restrictions. You may face legal repercussions if you have cannabis-related goods in a state where they’re prohibited or don’t have a medical prescription in states where the items are legal for medical use.

CBD vs. THC: Medical benefits

Many of the medical advantages of CBD and THC are similar. They can help with a variety of ailments. CBD, on the other hand, does not produce the same euphoric effects as THC. Because to this side effect, some individuals may prefer to utilize CBD instead of THC.

The U.S. Food and Drug Administration (FDA) green-lighted Trusted Source Epidiolex, the first prescription drug containing CBD, in June 2018. It’s used to treat uncommon, difficult-to-control sorts of epilepsy. (Epidiolex is not yet authorized for any of the other conditions listed below.)

CBD is used to help with other various conditions, such as:

• seizures
• inflammation
• pain
• psychosis or mental disorders
• inflammatory bowel disease
• nausea
• migraine
• depression
• anxiety

THC is used to help with the following:

• pain
• muscle spasticity
• glaucoma
• insomnia
• low appetite
• nausea
• anxiety

CBD vs. THC: Side effects

CBD is a relatively safe drug, even when taken in high dosages. According to StudyTrusted Source, any CBD side effects are most likely caused by interactions between CBD and any other medicines you’re taking.

THC causes temporary side effects, such as:

• increased heart rate
• coordination problems
• dry mouth
• red eyes
• slower reaction times
• memory loss
• anxiety

CBD’s side effects may include:

• appetite changes
• fatigue
• weight loss
• dizziness
• diarrhea

The negative side effects listed here are due to the drug’s psychotropic qualities. Neither is fatal. Marijuana dependence, on the other hand, has been linked to long-term mental problems in certain individuals. This is especially true for teenagers who consume a lot of THC, although there isn’t enough evidence that cannabis use causes psychiatric disorders such as schizophrenia.

CBD vs. THC: Drug testing

Cannabinoids, such as THC and CBD, are stored in the body’s fat. They may be detected for days or weeks after usage on drug tests. nNot every drug test is able to detect CBD, but there are CBD-sensitive options available. Most standard drug tests look for chemicals that are linked to THC, so marijuana use might show up on a screening.

Hemp can also generate THC in addition to CBD, so even if you haven’t used it, a test may come back positive for THC. It’s crucial to remember that goods that claim to be THC-free may not be.

Why do people talk about THC content in CBD oil if THC and CBD are two different compounds?

Cannabinoids are a class of chemicals found in cannabis that interact with cannabinoid receptors. CBD and THC are two of the most well-known cannabinoids in cannabis. Both cannabis and hemp produce CBD and THC. Cannabis has a greater concentration of THC than hemp. The average amount of THC in today’s cannabis strains is approximately 12 percent. A trusted source stated, “THC.”

CBD & THC – Better Together?

When cannabinoids, flavonoids, and terpenes from a cannabis plant are combined, they appear to work far better for medical purposes than any single component alone. The entourage effect is what causes this phenomenon; together, cannabis’ components can produce unexpected benefits that no individual component can accomplish alone.

The use of cannabis to treat chronic pain is a fantastic illustration. THC alone can handle severe discomfort effectively, but CBD can help with anxiety symptoms that might accompany chronic diseases. The use of CBD for sleep is becoming increasingly popular. Depression, arthritis, anxiety disorders, and headaches have all been shown to respond well to a combination of THC, CBD, and terpenes.

Legal Status

THC

Uruguay was the first country in the world to make marijuana legal for recreational use when it did so in 2014. Bill C-45 was passed in Canada. This legislation enables individuals to possess up to 30 grams of cannabis. It also permits the sale of cannabis by authorized businesses. Cannabis is prohibited at the federal level in the United States. However, it is permitted for recreational usage in certain states.

CBD

CBD derived from the cannabis plant is classified under Schedule I of the Controlled Substances Act. It is prohibited across the United States, however it may be acquired if produced from hemp with a THC level less than 0.3%.

Final Thoughts on CBD Vs. THC

CBD has grown increasingly available due to the Farm Bill’s passage. CBD products, including oils and capsules, are now available to consumers. CBD appears to help with a number of ailments in early research. CBD, in fact, may help patients with Parkinson’s disease manage their symptoms. Future studies might reveal more about CBD and how it can be used.

THC, on the other hand, may help with a variety of ailments. CBD, on the other hand, has been found to assist with a variety of health problems. THC, for example, has been linked to greater symptom relief and mitigation in one study.

According to the study, more THC correlated with greater effects while there was no apparent relationship between the amount of CBD and symptom relief. Despite THC’s possible benefits, it has a perceptible impact on perception. For some people, its psychoactive profile may be a disadvantage.

CBD and THC can, however, help with a variety of issues when used together, including multiple sclerosis. CBD’s ability to counteract the psychoactive effects of THC has been suggested as one explanation for the effectiveness of whole-plant cannabis.

Both cannabidiol (CBD) and tetrahydrocannabinol (THC) have medical applications. They’re also both considered safe, but be wary of any possible side effects or interactions with other medications you’re taking. Before using it, talk to your doctor or a knowledgeable cannabis or CBD specialist to ensure that you understand the risks involved.

A greater understanding of how each chemical can help individuals might be better discussed and analyzed as the number of CBD and THC research expands.